This exhibitor shows the following products and commodity groups:
The purpose of the Ball Abutment is to function as a retention element
of an overdenture, by means of an O-ring retention element inserted
under the overdenture.
The Ball Abutment is made of Titanium grade 5.
Teetanium Conical Implants
Conical teetanium® functional design makes this implant principally appropriate for immediate or quick implantation after loss or removal of natural teeth. Tapered teetanium® implant assures, through its wide dimensions range, an incomparable primary
stability in all bone types.
Straight Drillable Abutment
The purpose of the Abutment Post is to function as a crown support, once it is fixed with a screw at the implant. This crown is fixed to the abutment post by a cement union. The shoulder of the abutment post allows saving high heights of soft tissue, because with a height of 1, 2 and 4mm it can raise the point of retention of the reconstruction.
The Abutment Post is made of Titanium grade 5.
Coping Open / Closed Tray (Transfers)
The purpose of the Direct Implant Coping is to make the transfer position of teetanium implants in biological means to a working model for laboratory simulating the oral cavity.
The Direct Implant Coping is made of Titanium grade 5.
The purpose of the Waxing Screw is to help to maintain the channel
inside the abutment for the Prosthetic Screw that will be placed
after the casting.
The Waxing Screw is made of Titanium grade 5.
The teetanium® Surgical KIT
-Surgical Drills shared for both implant shapes in a single box
-3 Depth indicators
-Screwdrivers: 2 manual drivers, 1 driver for contra-angle and driver for wrench
-First Surgical Drills with adjustable stoppers
-Short and long, manual and mechanical adapters
-Torque wrench for implant manual insertion and prosthetic torque application
Office & home teeth whitening kits.
The purpose of the Implant Analog is to reproduce the position of the implants in biological means to a working model for laboratory simulating the oral cavity. The connection of this analog is exactly as the implant.
The Implant Analog is made of Titanium grade 5.
Castable Angled Abutment
The purpose of the Castable Angled Abutment is to reproduce the cone connection of the Angled Abutment. So that, prosthetic don’t
have to reproduce it in wax. When the copy of the mouth is been
created, the prosthetic insert an Implant Analog of the implant in
the same position of the implant, using the transfer. The abutment
is placed over the analog(check fig. 2 page 25), and cut by the
prosthetic to the right height. Afterwards, a wax model is built round it, that is used to construct a cast. Plastic and wax melt and are replaced by titanium.
The Castable Angled Abutment is made of POM-Delrin.
Temporary Cap Hexed / Non-Hexed
The purpose of the family of components Temporary Cap is to serve as bases for the accomplishment of an immediate esthetical reconstruction on Teetanium Abutment. This reconstruction will have a retentive element: retention with the prosthetic screw. A Straight Screwed Abutment is placed over the implant. The Temporary Abutment is added and cut to the right height. Afterwords the suitable material is used to build the provisional crown around it. The Temporary Cap is made of Titanium grade 5.