AMMDENT ORTHODONTIC ADHESIVE SYSTEM

INTENDED USE: Cementation of orthodontic bracket.
COMPOSITION: Crystalline and fumed silicon dioxide Bisg‐ma Stabilizer Photo initiators
INSTRUCTIONS FOR USE:
TOOTH PREPARATON 1. PROPHY the enamel surfaces to be bonded with plain pumice. Do not use prophy pastes which contain
oil or fluoride. Rinse thoroughly and dry teeth with oil and moisture‐free compressed air. Do not allow patient to rinse.
2. ISOLATE the cleaned teeth. A clean, dry surface is desirable for a good etch.
3. DISPENSE 1 to 2 drops of etching solution/Gel on to the dispensing pad. Use a cotton pledget or brush and apply etching solution with a DABBING motion to the prophyed teeth to be bonded. DO NOT RUB, as rubbing breaks the exposed enamel rods, which will result in a weak bond. Continuous application of etching solution for 60 seconds will provide the most desirable etch. Fluoridated and deciduous teeth may require a longer etch period of an additional 30 seconds.
4. RINSE thoroughly with water. At this point, do not allow patient to rinse or contaminate the enamel surface. Re‐isolate and dry tooth thoroughly. The etched area should appear frosty white. ETCHED ENAMEL MUST NOT BE CONTAMINATED BY SALIVA.