AMMDENT PIT & FISSURE SEALANT

PIT & FISSURE SEALANT
(LIGHT CURE COMPOSITE)
INTENDED USE:
To seal the pits and fissures and very small cavities.
COMPOSITION:
Bisg-ma, Triedma, Photo initiators,Stabilizer
INSTRUCTIONS FOR USE:
Perform prophylaxis with a non-fluoride paste oil free.
Isolate and dry each tooth with air oil free.
Apply etchant with a brush and allow etch for 60 sec.
Rinse well and dry. If the appearance does not look “chalky”
repeat the procedure.
Choose sealant base white or clear.
Place one drop of the pit and fissure sealant in a plastic well.
Apply over the occlusal surface watching carefully not to trap air
bubbles. Cure the pit and fissure sealant with a light from a curing lamp.
After the product is cured clean the occlusal surface with a cotton
pellet and check with an explorer if the cover is complete, then check the
occlusion.
Some patients can present allergy to the pit and fissure sealant light
cure or any of its components. In this case suspend it use. Do not storage at temperature above 24°C. Close the packages immediately after
dispense the product.
Contraindication: The material must not be used when the techniques
application described are not possible
WARNING:
•Always store the product in a cold area.
•keep out of the reach of children.
•In case of any change on the original function of the product, stop using
it and contact the manufacturer.
For Professional Dental use only