BEGO Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG

DEVINITIVE. FAST. AESTHETIC.

VarseoSmile Crown plus is the tooth-colored, ceramic-filled hybrid material for 3D printing permanent restorations, and makes the wish for a fast and inexpensive as well as aesthetic and durable patient restoration a reality.

The biocompatible material, which has been approved as a Class IIa medical device, is currently available in seven VITA classical shades (A1, A2, A3, B1, B3, C2, D3) and will also be available in a bleached shade in the future. VarseoSmile Crown plus has been validated for various 3D printers from renowned manufacturers and is a multi-talent with a wide range of uses: for single crowns, inlays, table tops, onlays, veneers and veneers for metal frameworks.

Printed restorations made from VarseoSmile Crown plus stand out, among other things, with their excellent aesthetics, fluorescence similar to that of natural teeth, low tendency to age and discoloration and a high wearing comfort for the patient.

The biocompatible material is antagonist-friendly and, thanks to its mechanical buffering effect, also ideally suited for the manufacture of implant-supported crowns.

A high adhesive bond of the material with luting composites prevents decementation and thus minimizes the possible formation of secondary caries.

Extensive scientific studies by renowned universities and institutes confirm the excellent features of the restorations made of VarseoSmile Crown plus.

All information on 3D printing of permanent restorations from VarseoSmile Crown plus, the overview of compatible 3D printing system components, the summary of the scientific studies conducted and the possibility to order free VarseoSmile Crown plus test sample crowns can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

VarseoSmile Temp is the tooth-colored resin for 3D printing of temporary restorations, which can be used in the anterior and posterior regions for both, short and also long-term temporaries (with a wear period of up to one year).

The material's range of indications includes 3D-printed crowns, inlays, onlays and veneers, as well as bridges with a design length of up to seven units.

With VarseoSmile Temp, aesthetic restorations can be realized which exhibit high strength and thus ensure a precise and dimensionally stable fit in the patient's mouth.

The material, which is approved as a Class IIa medical device, is available in shades A2, A3 and C2 according to the VITA classical shade system and is validated for various 3D printers from renowned manufacturers.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

VarseoWax Model is the new resin for solid or hollow 3D printing of full and partial dental models as well as models with removable dies. It is suitable for duplicating with silicone or gel and for the fabrication of splints, aligners, etc. using the thermoforming technique.

The dimensional stability as well as the smooth and pore-free surfaces of the printed models are the ideal basis for the fabrication of high-precision restorations.

The material also features high physical stability and is easy and error-free to process. The high material stability minimizes sedimentation during storage and facilitates mixing.

The opaque gray color of the models printed from VarseoWax Model ensures optimal visibility of all model contours and preparation margins. The models are resistant to moisture, can be insulated against adhesive wax, and are easy to clean. Its handling during processing is comparable to that of a conventional plaster model.

The new VarseoWax Model is suitable for processing in DLP 3D printers with a wavelength of 385 to 405 nm.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

VarseoWax CAD/Cast is the resin for 3D printing of burnout objects (partial denture or crown and bridge frameworks) and suitable for the Varseo 3D printer family as well as various 3D printers of renowned manufacturers.

The resin can be burnt out without leaving any residue and provides optimal conditions for pore-free, smooth and precise results.

The printing and processing parameters specially developed for the resin ensure perfect production sequences with results that can be reproduced at any time.

The improved material stability prevents the resin from thickening during storage and enables easy mixing.

The resin can be optimally processed with the shock-heat-compatible VarseoVest P plus and VarseoVest C&B investment materials, which have been specially developed for investing 3D printed objects. The high dimensional stability of the printed objects offers distortion-free investing and a high accuracy of fit of the cast objects.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

The Varseo XS is a compact, cost-effective, high-resolution DLP 3D printer with outstanding detail, specially developed for dental uses. With a printing speed of 30mm/h, regardless of the number of elements to be produced and its handy construction plate it is ideal for the printing of permanent crowns, inlays, onlays, table tops, veneers, veneers on metal frames as well as temporary restorations, CAD/Cast frameworks and models. The replaceable resin tank allows for easy material change.

Note: The BEGO VarseoSmile and VarseoWax materials are not only approved for the BEGO Varseo XS (as well as the Varseo, Varseo L and Varseo S), but also for a wide range of other 3D printers from well-known manufacturers.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

Thanks to decades of research and continuous innovation, BEGO is an alloy specialist and also has market-leading process expertise in CAD/CAM. These capabilities are bundled in the Mediloy® CAD/CAM milling blanks.

The cobalt-chrome (Mediloy® M-Co) and titanium (Mediloy® M-Ti4 und Mediloy® M-Ti5) milling blanks can be used for the lab-production of crowns and bridges (including metal ceramics) as well as implant prosthetics. The new CAD/CAM materials are biocompatible and corrosion resistant as well as free of nickel, cadmium and beryllium.

In addition to the outstanding material properties of the Mediloy® M-Co blanks, it is important to highlight the excellent economic efficiency due to 25 % less tool wear. The long-proven cobalt-chrome alloy, thanks to its homogenous structure, minimizes the risk of shrinkage cavities or porosities. The Mediloy® titanium milling blanks, and, are available as grade 4 pure titanium (M-Ti4) or grade 5 alloy (M-Ti5) and are particularly easy to work with. The titanium milling blanks Mediloy® M-Ti5 impress with their particularly high strength and thus enable long spans.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

Bellavest® SH: crown and bridge precision casting investment material for shock-heat and conventional heating

Precise results using precious and non-precious alloys can be achieved with the phosphate-bonded investment material Bellavest® SH just as reliably as with pressable and press-to-metal ceramic. Even the production of double crowns using non-precious alloys is not a problem thanks to the high level of total expansion which can be attained.

Simple processing with BegoSol® HE ensures maximum application flexibility as the desired expansion can be achieved for all requirements and indications with just a single liquid. This means extremely smooth and precise-fitting casting and ceramic pressing results are guaranteed.

Appointments can be coordinated with ease in the laboratory as Bellavest® SH can either be inserted directly at a temperature of up to 900°C or preheated conventionally. A fine and creamy consistency and long working time of approx. five minutes make working with Bellavest® SH both safe and easy. The material cures with a high edge-strength yet still permits easy deflasking.

WiroFine: Universal investment material for all applications in the partial denture and combination technique, for gel and silicone duplication.

Whether duplicating in silicone or using economical hydrocolloid, whether fast or conventional preheating, whether processed in combination with a C&B investment or in the one-piece casting technique – the casting quality with WiroFine leaves hardly anything to be desired.

With rapid preheating, the final temperature can be selected as the investment temperature (up to 1000°C). 

Thanks to WiroFine, the duplicate models have extremely smooth surfaces, which is reflected on the basal surfaces and reduces further processing time. In addition, the ideal flow properties lead to safe and relaxed working, as even the finest areas can be reproduced easily and precisely.

More details can be found at www.bego.com.

WIRONIUM®: The proven Cobalt-chrome partial denture alloy

Since 1972, the top-quality alloy WIRONIUM® has been used worldwide for the fabrication of conventional clasp retained partial dentures.

It exhibits excellent flow properties and enables easy processing.

The high yield strength and superior elongation at fracture result in highly stressable frameworks with excellent activability.

The reduced carbon content makes WIRONIUM® particularly suitable for laser welding with Wiroweld laser wire.

WIRONIUM® is biocompatible and corrosion resistant.

Wirobond® 280: Non-precious metal premium alloy for metal-ceramic or composite veneering – nickel-free and beryllium-free

Wirobond® 280 has been setting standards in the segment of non-precious metal-ceramic alloys for more than 15 years, as its Vickers hardness of 280 HV10 makes it very easy to work out.

The interaction of the elements chrome and molybdenum makes the alloy extremely corrosion-resistant and guarantees a wide range of indications thanks to high strength in all span sizes. The optimized coefficient of thermal expansion ensures that no prolonged cooling is necessary even with large spans, which translates to additional time savings.

Moreover, Wirobond 280® presents excellent melting and casting properties, allowing easy casting point recognition.

Wirobond® 280 also offers a secure bond to ceramic, which facilitates high-quality veneering.

Its biological compatibility, which is guaranteed by the formation of a firmly adhering passive layer, has been confirmed by an independent institute. This provides security for dental technicians, dentists and patients alike.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

Fornax® T, the compact benchtop casting device with high-performance induction heating guarantees short melting cycles, minimizes oxidation and facilitates subsequent finishing. With two adjustable starting speeds, optimum filling is ensured for every cast object. In addition, the Fornax® T has an integrated adjustable infrared sensor, which enables safe and gentle melting of all standard precious metal and non-precious alloys (except titanium).

The compact Nautilus® T benchtop vacuum pressure-casting device includes an integrated camera system that supports the dental technician by providing visual casting point recognition. For an easy operation, the Nautilus® T and Nautilus® CC plus devices feature a large 7" color touch display with intuitive menu navigation. The network connection via LAN or W-LAN, as well as integrated USB interfaces, allows access to the integrated casting log archive for both Nautilus® devices. The connection via the service portal my.BEGO.com enables direct remote diagnosis of the devices.

The BEGO casting devices are equally suitable for both non-precious and precious metal alloys and partial denture casting and allow time and cost savings as well as convenient handling in the laboratory. Due to their compact dimensions and designs, the Fornax® T and Nautilus® devices require very little space. Integrated power cooling provides for more than 50 casts in a row, even with high ambient temperatures.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.

The compact power laser

The low-cost LaserStar T plus compact laser welder impresses with high performance and user-friendly features.

The welding energy is adjustable by means pulse time, charging voltage and focus adjustment and thus enables precise welding.

The ergonomic design and the arrangement of the control elements directly in the field of vision enable convenient and fatigue-free working. The large color touch display and intuitive menu navigation allow easy operation of the device.

Four predefined material-specific pulse shapes are available to the user, allowing him to introduce the preset amount of energy into the workpiece in a metered manner, thus minimizing workpiece stresses and cracks.

Eco mode gradually switches off all unnecessary components in idle mode and reduces operating costs.

The external Ventus extraction unit effectively removes welding fumes that are hazardous to health from the working chamber – for the highest possible safety in the workplace.

More details can be found at www.bego.com.

We are looking forward to your visit in hall 10.2, booth M010/N019.