M6 milling unit with blank changer function

With the new M6 milling unit, Zirkonzahn automates processes, accelerates procedures and increases the productivity of the dental workflow. The milling unit has a 5+1 axis simultaneous milling technology and is equipped with a blank storage for up to 16 blanks (upgradeable) as well as a blank changer function permitting the automatic tranfer of blanks to the orbit. Once the new structure is completed, the blanks are reinserted again in their correct place in the storage. This means that restorations made of different dental materials, colours and heights can now be designed fully automatically without any manual intermediate steps. The wet and dry processing function permits the milling of all common soft and hard dental materials. The built-in Teleskoper Orbit M6 allows the processing of material blanks with a diameter of 95 mm, 98 mm, 106 mm and 125 mm. Thanks to special holders, also glass-ceramic blanks, Raw-Abutment® blanks and zirconia blanks (size 1) can be milled. In addition, the already known, innovative Teleskoper functions (adjustment of the friction, Double Milling, Stop & Go) can be used with the M6 milling unit. The M6 milling unit is equipped with the new Performance Spindle M6 by default. Thanks to a specially developed Permanent Magnet Synchronous Motor (PMSM) which is optimally adapted to the milling unit, this spindle can reach a maximum torque of 200 Ncm at speeds of 6.000 to 50.000 rpm with a peak power of 2.5 kW. In addition, the milling unit is equipped with a contamination-protected tool chamber which is separate from the milling chamber. The machine also features a 60-compartment tool magazine with automatic tool changer function: up to two magazines with 30 slots each, for up to 60 milling tools, can be stored in a safely and orderly manner. The tools are automatically checked for type or damage before and after each milling process.